Today, we should be putting the final touches on the DVD cabinet and getting it ready for its new home. We’ll rub down the last coat of oil that was applied Thursday evening with four-ought steel wool before applying a coat of SC Johnson Paste Wax. After the wax has dried and been buffed out we’ll use, brass inserts and fix the upper and lower cabinet pieces together. The brass inserts fit down though a 0.375″ drilled hole with a 0.500″ counter-bore 0.250″ deep. The insert accepts a 1/4″-20 UNC bolt. We’ll be using a 1/4″-20 X 1″ brass button head screw for this case.

Check back later this weekend for pictures of the completed project.